Product Upgraded Notice
Upgraded scanner model: RT206 2D barcode scanner engine.
General modification description: The decoded chip has been upgraded to a new version which has a faster decoding speed; This chip also more stable in terms of product supply.
To delete the Hanxin code, the product version has been upgraded to version 4.0.
Modification details listed as following :
1, Hardware modification: the decoded chip has been upgraded to a new version that has a much faster-decoding speed, besides it has lower power consumption, and it responds faster when it is turned on. The PCB layout has been modified as shown below.
Item | Old version V3.0 | New version V4.0 |
PCB layout modification |
2, Specification modifications :
Item | Old version V3.0 | New version V4.0 |
Decode capability | PDF417, Data Matrix, QR code, Hanxin code, and most 1D & 2D barcodes | Delete Hanxin code which is not used, others are the same |
Operation Current |
Current@3.3VDC Operating 131mA (typical) 171mA (max.) Standby 8.2mA Sleep ≤10uA |
Current@3.3VDC Operating 100mA (typical) 168mA (max.) Standby 8.1mA Sleep ≤100uA |
Serial mode Response time | Awake time from deep low consumption: 131ms Turn on time from power off to power on 211ms | Awake time from deep low consumption: 106ms Turn on time from power off to power on 206ms |
USB mode Response time |
Awake time from deep low consumption: 203ms Turn on time from power off to power on 287ms |
Awake time from deep low consumption: 117ms Turn on time from power off to power on 206ms |
3, Software modification description :
After upgrading, it does not support reading Hanxin code.
The default maximum length of the QR code has been changed to 6144.
EAN-8 includes 2/5 digit extra code’s AIMID has been changed from “]E4…]E1..”/“]E4…]E 2..” to “]E4”.
Conclusion remark:
All the other parts including the installation screw holes, dimensions,
configuration codes, barcode decoding, protocol commands, etc are completely the same as the old V3.0 version.
Upgrade Effective date: 20th Oct. 2020
Any technical questions, kindly contact our support team at support@rtscan.net.